Condor

Rovaniemi | Lapland | Finland | tel: +358-40-728-4667 | email: myynti@kivelaoutdoor.com

Condor Wilderness Tool: € 59.00 (varastotuote)

Ainutlaatuinen, innovatiivinen, monipuolinen ovat parhaita sanoja kuvaamaan Condor Wilderness työkalua!

Tästä työkalusta löytyy vesuri ja kirves samassa (itseasiassa 4 terää)! Erinomainen eränkävijän väline, joka sopii tiheiden puskien raivaamiseen, ampumasektorin raivaamiseen, leirin rakentamiseen, nuotion tekoon, lihan käsittelyyn, ihan mihin vaan. Toimii havumetsävyöhykkeellä kuten kirves ja lapin puuttomissa erämaissa kuten vesuri tai leuku. Pelaa metsässä ja puutarhassa. Leukumainen teroitus. Erinomainen laatu. Todella pitävä kädensija. Mukana tyylikäs nahkainen suojus. Innovativinen suunnittelu on Arlan D. Lothen käsialaa ja se on patentoitu. Valmistajana valtava työkalutehdas Imacasa El Salvadorissa. Siellä osataan harventaa pusikot ja tehdä machetet.

Kuinka paksulle puutavaralle tuolla terätyökalulla oikeasti pärjää ?

”Työkalua voi verrata vesuriin tai pieneen kirveeseen noilta osin, sillä erotuksella, että kirveen kiilamainen terä halkaisee pölkkyä helpommin. Condorilla ei periaatteessa ole puun koossa rajaa. Jotain 10 cm koivua katkaistakseen pitää pätkiä tietenkin usempi kerta - ohut kirveenterä kyllä haukkaa nätisti. Isojen maapuiden katkominen on sahalla kätevämpää. Condor on parhaimmillaan sellaisissa leiripuissa... eli 4-5m laavupuissa, keitintangossa jne. Se että kirveen terässä ei ole kiilaa ei haittaa juurakon paloittelussa. Tällä + sahalla sa kyllä rakotuletkin oikein kätevästi. Jos pitää kategorioida niin Condor menee toiminnallisesti jonnekin leukun ja kirveen väliin. Sillä kyllä vuolee yhtä hyvin kuin leukulla. Todella pitävä kahvakin auttaa. Tässä mielessä selkeästi parempi kuin vesuri, menee lähemmäksi puukkoa tai leukua.”

Terä: 420 HC ruostumaton teräs, paksuus 3 mm, lämpökäsitelty 53 Rockwell kovuuteen

Teroitus: kovera, erittäin teräväksi viimeistelty

Kahva: ruotoon ympärivalettu kumimainen ”Poszegrip" Santoprene, urissa kumiset O-renkaat

Paino: 380 g

Pituus: 31 cm

Viimeistely: Ultrablac2 (ylempi kuva)

Tuppi: nahkainen, käsintehty, saranoidulla vyölenkillä (kahva ylöspäin)

Multi Knife 2: € 45.00 (varastotuote)

Todella monipuolinen ja laadukas veitsi, joka soveltuu eräkäyttöön, retkille, pieniin raivaustöihin yms. Terän hamarapuolella on vesuri. Leukumainen teroitus. Pitävä kädensija sormisuojalla ja narulenkillä. Mukana vankka nahkainen tuppi, jossa on kaksi vyölenkkiä: ylempää tai alempaan kantoasentoon. Katso YouTube-video!

Terä: 420 HC ruostumaton teräs, pituus 6” (15,3 cm), paksuus 3 mm, lämpökäsitelty 53 Rockwell kovuuteen

Teroitus: kovera, erittäin teräväksi viimeistelty

Kahva: 130 mm, ruotoon ympärivalettu kumimainen ”Poszegrip" Santoprene, urissa kumiset O-renkaat

Paino: 183 g puukko, 218 g tupen kanssa

Kokopituus: 285 mm

Viimeistely: satiini, kiillotetut terät

Tuppi: nahkainen, käsintehty, kahdella vyölenkillä (high or low carry)

Elinikäinen takuu!

Condor Tool & Knife offers a unique line of high quality, superbly designed tools for the outdoor enthusiast.

Our line of fine machetes, axes, knives and survival tools are made to the highest technical specifications and will last a lifetime.

Condor tuotteiden ominaisuuksia:

POSZEGRIP HANDLES are made of a special Santoprene for strength and just the right amount of softness to provide a true cushioned grip. All the handles have a non-slip texture. The special CONDOR TK blue/grey color was selected not only to make the handles distinctive, but to also help one locate the tool if it is laid down anywhere, particularly on the ground. All the molded handles feature full tang construction and all feature a metal lanyard eyelet that passes through the tang for added strength.

The shovel and machetes handles are made from solid Polypropylene and the wood handles are hickory-like hard woods from South America.

BLASTED SATIN FINISH is achieved by sand or bead blasting the metal part.

ULTRABLAC2 FINISH is a black oxide finish for greater metal protection and to provide a more subdued Para Military like look. This special black oxide is actually cooked into the metal at 285°F. This finish meets and exceeds several military specifications from the U.S. and from other countries around the world.

MYSTIC CAMO FINISH Is a secret finishing process developed by Condor Tool & Knife to add a random black and grey camo pattern to its blades. This process involves no painting or other surface additions. This special finish becomes part of the blade surface and will not ware off.

ETCHED DAMASCUS FINISH This special finish found on some of our axes, hatchets and machetes is a special process by which we etch away some of the surface, thus reducing surface friction. Tools with this finish will out perform tools with a traditional finish. With our exclusive Etched Damascus finish one can do more work with less effort. It is much like the same principal used for butter and cheese knifes. Plus, it adds a unique “look’ to our tools, almost like traditional hand forged Damascus.

BLADES are made from German 420HC (high carbon) surgical quality stainless steel and are heat treated and annealed to about 53 Rockwell (a measure of hardness). Every edge is hand finished and polished to razor sharpness.

SAFETY ROLL PINS most Condor axes and hatchets have a stainless steel safety roll pin that goes through the head and handle. We added this feature when it was noted that competition speed chopping axes have this feature to keep the axe heads from flying off the handle and into the audience. We want our axes to perform better than others and be safe as well.

VACUUM ASSIST INVESTMENT CASTING is a special manufacturing process we use to make our axes and some knives in 440C stainless steel. This process allows for greater product detail, strength and manufacturing economics. This process allowed us to engineer our patent pending CIP (cast-in-place) wedge on all CTK axes and hatchets, where the wedge that holds the head to a wood handle is actually a part of the head.

THE DENDRITIC EDGE is a result of a phenomena that takes place during the investment casting process, where microscopic particles of carbide are formed at an edge and then exposed during sharpening. These microscopic carbides improve the edges cutting ability. Cutting tools with the Dendritic edge simply cut faster and stay sharp longer.

CONDOR LEATHER SHEATHS are high quality, heavy duty, hand crafted black leather. Many of the designs feature a swiveling belt loop that allows the tool to swing out of the way while moving through brush or the jungle. The tool can also be swung out of the way while riding in a truck or car, thus not poking one in the side as a conventional knife sheath. The CTK Combat Knife features a patent pending Double lock, Double Carry sheath that can be worn in a high or low position. The high position features a double locking design to keep the knife in the sheath. The low position is for normal carry and the high position is for concealment.

LIMITED LIFETIME WARRANTY CTK products are warranted to be a free of defects in materials, manufacture or assembly for the lifetime of the original purchaser. Damage due to abuse, misuse or neglect is not covered. Defective products will be reapaired, replaced or substituted with the same item or item of equal value. To get service under warranty, send the product, postage paid, to the address listed below. You may also have other rights which vary from state to state.

SATISFACTION GUARANTEED If for any reason you are not 100% happy with the performance of any of the these products, simply return with postage paid to Condor Tool & Knife, with dated proof of purchase for a full refund.

QUALITY CONTROL All our products are constancy checked for quality assurance. All our blades have great flexibility and strength. If you know how to make quality blades you do not have to make them thick to perform; thinner, lighter and faster is better.